Alat & bahan:

Cable UTP 2 buah

Connector RJ45 4 buah

Crimping tool

TP_Link

Straight cable:

· Potong cable UTP sepanjang ±1m sebanyak 2 buah. Lalu buat kabel straigth

Susunan cable ujung 1dan  cable ujung 2 

PO

 O

            PH

             B

           PB

            H

           PC

            C

· Susun cable straight di kedua kabel

· Setelah tersusun rapih masukan kabel ke connector RJ45 lalu press dengan crimping tool

· Setelah selesai masukankedua kabel tersebut ke kabel ujung 1 ke TP_Link lalu hubungkan cabel ujung 2 ke PC

· Setelah terhubung lakukan pngecekan dan setting connectionnya dengan cara

Klik START lalu CONTROL PANEL lalu klik NETWORK AND INTERNET CONNECTION lalu klilk NETWORK CONNECTION lalu klik kanan LOCAL AREA NETWORK lalu klik properties dan pilih Internet Protocol(TCP/IP) klik PROPERTIES lalu klik USE THE FOLLOWING IP ADDRESS:

IP adress : 192.168.0 .1

Subnet Mask : 255.255.255.0

Default gateway : 192.168.0 .0

Lalu klik use the following DNS server:

Preferred DNS server : 192.168.0 .1

Lalu klik ok

Lakukan langkah yang sama di komputer2

IP adress : 192.168.0 .100

Subnet Mask : 255.255.255.0

Default gateway : 192.168.0 .0

Lalu klik use the following DNS server:

Preferred DNS server : 192.168.0 .1

Lalu klik ok

· Setelah itu klik START lalu RUN lalu ketik CMD lalu OK

· Setelah masuk ke command prompt ketik ping 192.168.0.1 lalu enter

Pinging 192.168.0.1 with 32 byte of date

Reply from 192.168.0.1 byte=32 time=1ms TTl=128

Reply from 192.168.0.1 byte=32 time=1ms TTl=128

Reply from 192.168.0.1 byte=32 time=1ms TTl=128

Reply from 192.168.0.1 byte=32 time=1ms TTl=128

Ping statistic for 192.168.0.1

Packets : sent=4, received=4, lost=0 (0% loss)

Approxiamate round trip time in milli-seconds:

Minimum=1ms, maximum=1ms, average=1ms

Lkaukan hal yang sama di komputer 2

· Setelah masuk ke command prompt ketik ping 192.168.0.100 lalu enter

Pinging 192.168.0.100 with 32 byte of date

Reply from 192.168.0.100 byte=32 time=1ms TTl=128

Reply from 192.168.0.100 byte=32 time=1ms TTl=128

Reply from 192.168.0.100 byte=32 time=1ms TTl=128

Reply from 192.168.0.100 byte=32 time=1ms TTl=128

Ping statistic for 192.168.0.100

Packets : sent=4, received=4, lost=0 (0% loss)

Approxiamate round trip time in milli-seconds:

Minimum=1ms, maximum=1ms, average=1ms

SUBNETTING

Impelmentasikan range 192.168.0.100/24

Langkah1:

IP =192.168.0.100 = 11000000.10101000.00000000.01100100

SM =255.255.255.0 = 11111111.11111111.11111111.00000000 and

NA =192.168.0.0 = 11000000.10101000.00000000.00000000

Langkah2:

Y=2ⁿ-2

=2⁸-2

=256-2

=254

Langkah3:

192.168.0.1 s/d 192.168.0.254